RESOURCES / DURIX

Technical resources for industrial sawing.

Guides and troubleshooting material for band saw blades — the main line — with circular saw blades and band knives as extensions. Written for the people who select a blade, run it, and have to explain why a cut failed.

Ask for Technical Advice Start with the guides
Placeholder, 1600 by 1000 pixels, reserved for a cutting-moment photograph
IMG A · 1600 × 1000 (16:10) · cutting moment — blade in cut
START HERE

Two libraries carry most of the work.

Selection questions and cutting failures are the two reasons buyers and production engineers write to us. Both libraries are built around those — not around news.

Placeholder, 800 by 600 pixels, reserved for a blade macro photograph

IMG B · 800 × 600 (4:3) · blade macro — tooth geometry

01 / GUIDE

Technical Guides

Long-lived reference material: how a blade is matched to the material, the machine and the cutting condition, how the common grades differ, and what a correct break-in changes.

  • Band saw blade selection by material, machine and cutting condition
  • M42, M51 and carbide — where each grade fits, and where it does not
  • Tooth pitch and tooth form for different workpiece shapes and sizes
  • Break-in and the everyday operating parameters around it
Open the guides
Placeholder, 800 by 600 pixels, reserved for a guide-block and cut-surface photograph

IMG C · 800 × 600 (4:3) · cut surface / guide detail

02 / TROUBLESHOOTING

Troubleshooting

Symptom first, then possible causes, then the checks that separate them. Every issue follows the same order: what you see, what usually causes it, what to measure, and what we need from you to judge the case.

  • Blade breaking
  • Tooth stripping
  • Crooked cuts and blade wandering
  • Short blade life
  • Slow cutting and dull blades
  • Weld joint failure
Open troubleshooting
03 / ALSO INSIDE

Notes and files.

Secondary material for the same audience: short notes on cutting practice, and the catalogues and technical sheets we send on request.

BLOG

Blog

Short notes on cutting practice, buying and OEM programmes — written when there is something factual to say, not on a publishing schedule.

  • Band Saw Knowledge
  • Circular Saw Knowledge
  • Buying & Sourcing
  • Distributor Business
  • Company & Industry
Open the blog
DOWNLOADS

Downloads

Catalogues and technical sheets are sent on request, so what you receive matches your machine and application instead of a generic file.

  • Product Catalog
  • Band Saw Blade Guide
  • Circular Saw Blade Guide
  • Technical Sheets
Request a technical file
04 / FEATURED TOPICS

Where most projects start.

These come up in almost every inquiry. They are the first pages of each library — and the fastest way to see how we judge a cutting problem.

Placeholder, 1200 by 800 pixels, reserved for an engineering-detail photograph
IMG D · 1200 × 800 (3:2) · engineering detail — weld, marking or coil
Type Topic What it covers
GUIDE Band saw blade selection Material, machine and cutting condition turned into one specification.
GUIDE M42 vs M51 vs carbide Where each grade fits, and when the higher grade is not the answer.
GUIDE Tooth pitch and tooth form Pitch logic for solid, tube, profile and bundle cutting.
GUIDE Blade break-in What the first cuts should look like, and what skipping break-in costs.
TROUBLESHOOTING Blade breaking Tension, guides, feed rate, wheel condition and the weld joint.
TROUBLESHOOTING Tooth stripping Tooth pitch, feed rate, material skin and break-in.
TROUBLESHOOTING Crooked cuts and wandering Tension, guide wear, feed rate and machine alignment.
TROUBLESHOOTING Short blade life Separating material, blade, machine and operating causes.
05 / TECHNICAL ADVICE

Judgement before quotation.

A blade is specified against facts, not against a price list. These are the points we work through with you — and the details that let us answer quickly.

  1. Application matching

    The blade is matched to your material, machine and cutting condition before anything is quoted.

  2. Problem diagnosis

    Breakage, tooth stripping, wandering, short life and blunt cutting are investigated before a product is recommended.

  3. Sample and trial support

    Sample or small-batch trials are benchmarked against the blade you run today, with the observation criteria agreed in advance.

  4. Supply, quality and delivery coordination

    Specification, quantity, packing and marking are confirmed before shipment. OEM programmes are coordinated, not promised.

TALK TO DURIX

Send us the cut, not only the part number.

Material, machine, the blade you use today and what actually goes wrong — that is enough for a first technical answer.

Request a Quote / Ask for Recommendation